Chapter 2: Dip Switch Settings; Accessing The Dip Switches - Star Micronics SCP700 Series Programmer's Manual

2

Chapter 2: DIP Switch Settings

The printer's DIP switches let you change communications parameters, thermal
printing density, interface type, input buffer size, and emulation. This chapter
explains the settings you can make and tells you how to actually change DIP
switch settings.

Accessing the DIP switches

The DIP switches are located inside the printer, underneath the document table.
Use the following procedure to remove the document table so you can operate
the DIP switches.
Make sure that the printer is turned off and unplugged from its wall outlet.
Open the printer cover.
Use a Phillips head screwdriver to remove the two screws that secure the
document table in place.