Star Micronics SCP700 Series Programmer's Manual page 72

70
CODE
HEX
FUNCTION
Value of n
0 or "0"
1 or "1"
2 or "2"
3 or "3"
<ESC> "T"
(1B)H (54)H
Setting print direction in page mode
Sets the direction in which the printing will be executed in page
mode according to the value of n.
This command is only valid in line mode.
0 rotation mode (uni-directional printing)
270 rotation mode (uni-directional printing)
180 rotation mode (uni-directional printing)
90 rotation mode (uni-directional printing)
The default value of n is 0.
<Rotation direction examples>
n = 1 n = 1 or 4
0 rotation 270 rotation
12345•••
ABCDE•••
This command is only valid with the slip printer.
n
n
Mode
n = 2
180 rotation
ABCDE•••
12345•••
n = 3
90 rotation