Dip Switch Settings - Star Micronics Rainbow NX-1000C User Manual

Adjustment lever
Figure 1-14. Adjusting for different thicknesses of paper
DIP SWITCH SETTINGS
When you remove the printer's cover and look inside, you will see a
group of small switches on the green board at the bottom of the printer.
These are the printer's DIP (Dual In-line Package) switches. The switches
are numbered 1 to 10 from left to right.
Figure 1-15. DIP Switches
l!
For all switches, the ON position is towards the back of the printer and
the OFF position is towards the front. To set a DIP switch, use a ballpoint
II
pen or other small implement to move the switch to the ON or OFF position.
14