Star Micronics SCP700 Series Programmer's Manual page 64

Combination printer

Hide thumbs Also See for SCP700 Series:

Table of Contents

Peripheral Device Control

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

<ESC> <BEL> n1

Define drive pulse width for peripheral device #1

Defines the drive pulse width for peripheral devices requiring other

than standard 200 ms pulse time and delay time.

n1 indicates the energizing time and n2 indicates the delay time,

using 10ms units.

<BEL>

Control peripheral device #1

Executes drive pulse for peripheral device #1.

<FS>

Control peripheral device #1 immediately

Executes drive pulse for peripheral device #1 immediately.

<EM>

Control peripheral device #2 immediately

Drives peripheral device #2. The drive pulse width and delay time

are fixed at 200 ms.

<SUB>

Control peripheral device #2 immediately

Drives peripheral device #2. The drive pulse width and delay time

are fixed at 200 ms.

Table of Contents