Star Micronics SCP700 Series Programmer's Manual page 35

Printer Station Selection
CODE
FUNCTION
Character Selection
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
<ESC> "+"
1B 2G
Print Station Selection
n = 0, "0" : Selects the receipt printer
3, "3" : Selects the slip printer
This command is only valid when it entered at the beginning of a
line. Be sure to add <LF> in the data immediately before this code.
<ESC> "R"
1B 52
Select international character set
Selects an international character set according to the value of n, as
shown below:
0 n 12, "0"
n = 0, "0" : U.S.A.
3, "3" : England
6, "6" : Italy
9, "9" : Norway
12, "C" : Latin America
Although the international character set can also be selected using a
memory switch, the control code setting is given priority.
<ESC> "/"
1B 2F
Select zero style
Causes subsequent zero characters to be printed with a slash when n
is 1, and without a slash when n is 0.
The valve of n can be set to 0(00H) or "0"(30H), or 1(0H) or
"1"(31H).
The default may differ depending on the memory switch setting.
"A" n
41 n
n
n
n "9", "A" n
1, "1" : France
4, "4" : Denmark
7, "7" : Spain
10, "A" : Denmark 2
n
n
"C"
2, "2" : Germany
5, "5" : Sweden
8, "8" : Japan
"B" : Spain 2
33