Star Micronics SCP700 Series Programmer's Manual page 55

Slip printer: Prints a high density bit image of the number of dots specified by n1 and n2.
The value of n1 + 256 n2 is between 1 and 420.
A maximum of 420 data bytes can printed in one line. Any data exceeding
420 bytes is ignored.
After printing the bit image, the printer automatically returns to the character
mode. The relationship between the pins on the print head and the data is the
same as those shown for the previous bit image code <ESC> "K".
While printing a high density bit image, the horizontally adjacent dots
cannot be printed.
EXAMPLE
Printing Sample
We will create the design below using a bit image.
First, since the volume of data is 30, n1 = (1E)
is converted to hexadecimal, it appears as shown below.
Hexa-
Data Binary
decimal
m1 00000001 01
m2 00011110 1E
m3 00111110 3E
m4 01011111 5F
m5 00011111 1F
m6 01011110 5E
m7 00011110 1E
m8 00111111 3F
m9 00101111 2F
m10 00111110 3E
Horizontal density is three times that of the bit image for <ESC>"k".
(Compare the print samples.)
Hexa-
Data Binary
decimal
m11 00111110 3E
m12 00000010 02
m13 00000010 02
m14 00111110 3E
m15 00111110 3E
m16 00101111 2F
m17 00101111 2F
m18 00111110 3E
m19 00101110 2E
m20 00101110 2E
. If the data m1 ~ m30
H
Hexa-
Data Binary
decimal
m21 00111110 3E
m22 00101110 2E
m23 00101110 2E
m24 00111110 3E
m25 00101111 2F
m26 00101111 2F
m27 00111110 3E
m28 00111110 3E
m29 00000010 02
m30 00000010 02
53