Star Micronics SCP700 Series Programmer's Manual page 77

Combination printer

Hide thumbs Also See for SCP700 Series:

Table of Contents

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

<ESC>

"@"

Initialize printer

Reinitializes the printer. Clears the print buffer and returns settings

to their power-up values.

Does not clear the input buffer, downloaded characters, or conditions

for peripheral devices.

In addition, this command initializes the print station selection. If the

slip printer was selected, the receipt printer will be re-selected.

If this command is specified in page mode while printing using the

slip printer, printing is not carried out and the printer returns to line

mode from page mode.

This command cannot recover from errors or return to the on-line

status from off-line.

<ENQ>

Enquiry

Causes the printer to transmit a status byte.

Table of Contents