Table of Contents
Advertisement
2.3 Power supply specifications
1) Power supply input connector (II type)
Optional AC adapter will be used for this printer（Power to be supplied from outside）
Connector on printer side ：TCS7960-532010 Hosiden or equivalent
Connector on Adapter side ：TCP8927-631100 Hosiden or equivalent
No
1
2
3
Shell
2) Electrical condition
Operating Voltage
Current Consumption ※1,※2
Standby
Printing
Power supply
NP-266S I
NP-266S II
NP-366S I
NP-366S II
* Paper Feed only
※1
Please use a higher capacity AC adaptor for more than such printing or for the other power supply
prepared by your side.
※2
If power supply cable is excessively long, the operation may become unstable. Cable should be made
as short as possible. If not available, connect cables near the printer and place an electrolysis
condenser of 2200µ between power supply and ground. Voltage resistance should be higher than 35V.
* For preventing from static electric discharge, make sure to connect FG wire.
D-F0399 NP-266S/366S Specifications Ver.0.01 Provisional
Function
+24V
GND
N.C
FG
: DC24V±5%, DC5V±5% (Type I)
: DC24V±5% (Type II)
: Average approx. 0.1 A
:
Printing average of 25%
24V
Max. approx. 1.91 A
5V
Max. approx. 0.16 A
24V
Max. approx. 1.89 A
24V
Max. approx. 2.73 A
5V
Max. approx. 0.16 A
24V
Max. approx. 2.75 A
: Average approx. 0.50 A
Connector drawing
1
6
3
2
Printing average of 100 %
Max. approx. 7.64 A
Max. approx. 0.17 A
Max. approx. 7.56 A
Max. approx. 10.92 A
Max. approx. 0.17 A
Max. approx. 11.00 A
Advertisement
Table of Contents
