Casablanca 19 Century Owner's Manual page 11

Step 18. Slide the light kit over the
threaded pipe from the switch housing.
Assure that no wires are pinched.
Secure the light kit to the fan with the
finial.
Tighten securely by hand only.
Step 19. Loosen the three glass screws for each
fixture so the end of the screws are flush with
the inside of the fixture.
Slide the glass shade into the fixture and hold
firmly. Turn each screw several times, going
in a circle, to assure that all glass screws have
engaged the glass.
Tighten securely by hand only.
Step 20. Install the four 60-watt G-16.5 bulbs
into each fixture.
INSTALL LIGHT KIT
GLASS HARDWARE
60 WATT TyPE g-16.5
CANDELABRA-BASE BULB
GLASS & BULB INSTALLATION
19 Century
th
THREADED
PIPE
FINIAL
gLASS SHADE
SCREWS
60 WATT TyPE g-16.5
CANDELABRA-BASE BULB
™
gLASS SHADE
gLASS SHADE