Advertisement
CAUTION: Read and follow all instructions before
operating the fan. Do not use the fan if any part is
damaged or missing.
READ & SAVE THESE INSTRUCTIONS
1.
Never insert fingers or any other objects through the cage guard when the fan is in operation.
2.
Close supervision is necessary when any appliance is used by or near children.
3.
Disconnect the fan when moving from one location to another.
4.
Disconnect the fan when removing grill guard for cleaning, servicing, maintenance, and before moving to another location.
5.
Be sure the fan is on a stable, flat surface when in operation.
6.
DO NOT use the table fan in windows. Rain and moisture may create an electrical hazard.
7.
DO NOT operate fan in the presence of explosive and/or flammable fumes.
8.
DO NOT place fan or any parts near an open flame, cooking or other heating appliances.
9.
DO NOT operate any appliance with a damaged cord or plug, after the appliance malfunctions, or has been dropped or
damaged in any manner.
10. To disconnect, grip the plug and pull from wall outlet. Never pull on the cord.
11. To protect against electrical shock, do not immerse the fan, plug, or cord in water or spray with liquids.
12. DO NOT put fan in a damp place or where humidity is high, such as a bathroom.
13. DO NOT use near curtains, plants, window treatments, et cetera.
14. This appliance has a grounded three-prong plug and is suitable for grounded receptacle use only. An adaptor is available
from your local hardware store for connecting three-prong grounding-type plugs to two-slot receptacles. The adapter must be
properly grounded. DO NOT attempt to defeat the purpose of this safety feature.
15. Improper installation may result in a risk of fire, electrical shock, or personal injury.
16. ALWAYS use on a dry surface.
17. Use fan only for intended use.
18. This product is intended for household use only and not for commercial or industrial use.
Table & Desk Fan: No assembly required. Please skip to the
Important Saftey Instructions below.
Floor Fan:
1. Make sure you are familiar with the 3 components: Motor
Cage Assembly, Pipe Assembly, and Base Assembly.
2. Lay the Motor Cage Assembly on a flat, protected surface,
face down.
3. Take the Pipe Assembly and make sure that the collars on
both ends are pulled in enough to expose the notch in the
pipe.
4. Take the cord from the Motor Cage Assembly and feed it
through the pipe (both ends are the same). Make sure the
plug clears the end of the pipe.
5. Align the pipe collar onto the neck post of the Motor Cage
Assembly, sliding the tab of the motor cage into the notch of
the pipe.
6. Thread the collar and turn the until it is snug.
7. Lay the base of the fan on it's side close to the pipe. The
761 Corporate Center Dr. • Pomona, CA 91746 • (909) 689-1477 • (800) 498-8482
FILE NAME ( SM_ZEPHAIR FLOOR FAN ) RAS 4-13-04
SAFETY FIRST
IMPORTANT SAFETY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
WARNING: To reduce the risk of fire or electric shock,
do not use this fan with any solid state speed control
device.
Step 5
Step 5
IX - 6.2
TAB
NOTCH
(Continued) -
Assembly instructions.
Advertisement
