Tap - Epson SF-710 User Manual

SF-710/510/310 User's Guide

Tap

You can perform one of the following operations by tapping the screen once while measuring.
Tapping is only supported while measuring in SF-710/SF-510.
Function
Lap
Light
Screen Chg.
OFF (default)
Note:
❏ When you want to change functions operated by tapping, set Tap from the Mes. Settings menu.
"Mes. Settings" on page 87
U
❏ The operation may not be recognized if you tap the screen rapidly in succession. Leave a gap of approximately one
second between taps.
❏ When bike mode is selected, the tap function may operate automatically depending on the condition of the road surface.
If this occurs, we recommend setting OFF.
Preparing and Basic Operations
Records the lap.
The same operation as pressing D while measuring.
Turns on the light. The light turns on for approximately 10 seconds.
The same operation as pressing B.
Changes between the four measurement screens.
The same operation as pressing A.
Turns off tap operations.
21
Explanation