Epson SF-710 User Manual page 30

SF-710/510/310 User's Guide
Preparing and Basic Operations
GPS positioning continues while measuring, and when
positioning is complete the device starts recording
positional information. The route before GPS
positioning is complete is not recorded.
Indoor mode (SF-710/SF-510 only)
This function allows you to measure without
performing GPS positioning. Use this when GPS
positioning cannot be performed because you are
indoors and so on.
The route and so on is not recorded in indoor mode.
Also, measurement items are limited in indoor mode.
"Measurable items" on page 33
U
Use either of the following methods to enter indoor
mode.
❏ Hold down C on the time screen
❏ If GPS positioning fails, select Indoor on the screen
displayed
30