Mes. Settings Table - Epson SF-710 User Manual

SF-710/510/310 User's Guide

Mes. Settings Table

Setting items
Activity Type
Mode
GPS
AT Lap
AT Pause
Target Pace
Settings
Value
Run (default)
Walk
Bike
Chronograph (default)
Interval
Goal
-
Setting1
Setting2
Setting3
Setting4
Setting5
OFF (default)
ON
OFF (default)
Setting1
Setting2
Setting3
OFF (default)
Explanation
Set when running or jogging.
Set when walking (exercising at a slow pace).
Set when performing exercises that do not require you to
swing your arms, such as riding a bike. We recommend
setting Bike mode when in vehicles such as cars or trains.
Set the mode to suit the measurements you want to
make.
Chronograph mode allows you to measure split times
and lap times (section measurement) simultaneously.
"Measuring Time, Distance, and Speed
U
(Chronograph Function)" on page 37
Interval mode allows you to switch the sets of hard
(sprint) or light (rest) exercises, and repeat using the
specific distance or time set in advance.
"Setting a Time and Distance for Hard and Light
U
Workouts(Interval Function)" on page 42
Goal mode measures until the time or distance set in
advance is reached.
"Measure until the time or distance set in advance is
U
reached (Goal function)" on page 50
Displays the number of GPS satellites being accessed.
When a time or distance set in advance is reached, this
function records laps automatically.
Set the lap time or distance.
You can set five times or distances.
"Recording Laps Automatically (AT Lap Function)"
U
on page 55
This function automatically stops measuring when you
stop running, and resumes when you continue running.
"Automatically Start/Stop Measuring (AT Pause
U
Function)" on page 57
Set the target time and pace range for one kilometer. An
alarm sounds if you are outside the set pace range.
You can set three target paces.
"Setting a Pace and Measuring (Target Pace
U
Function)" on page 59
89