Resetting The System - Epson SF-710 User Manual
Gps sports monitor
Hide thumbs
Also See for SF-710:
- User manual (149 pages) ,
- Ios user's manual (40 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
SF-710/510/310
User's Guide
Resetting the System
If operations are unstable, try resetting the system.
Hold down all of the buttons (A/B/C/D).
The screen is reset and the device restarts.
Initialize the device after restarting.
"Initial Settings" on page 25
U
c
Important:
Measurement data is not recorded if a system reset is performed while measuring.
Note:
❏ Setting data and measurement data remain as they were before the reset was performed.
❏ The following shows the differences between a system reset and initializing. The time needs to be set again for both
operations.
System reset: The User Settings, Sys. Settings, Mes. Settings, history, stride, HR monitor, and smartphone registration
information all remain as they were before the reset was performed.
Initialize: The User Settings, Sys. Settings, Mes. Settings, history, stride, HR monitor, and smartphone registration
information are all initialized.
Troubleshooting
118
Advertisement
Table of Contents
