Epson SF-710 User Manual page 24

SF-710/510/310 User's Guide
After placing the device into the bottom of the cradle, push carefully on the top of the device until it is fixed in
place.
c
Important:
Make sure the device is placed in the correct direction; otherwise, the cradle could be damaged.
When the device is placed in the correct direction, the alarm sounds, the following screen is displayed, and
charging starts.
Although the average time necessary for a full charge is 2.5 to 3.5 hours, this varies depending on the situation.
C
Check that charging is complete.
When the following charging icon is displayed, charging is complete.
Note:
When the battery icon displays 100%, an over-charge prevention function is activated. The device will not be damaged
even if you continue to charge the battery.
D
When charging is complete, remove the device from the cradle.
Hold the cradle and press the device down into the lower part of the cradle for a smooth release.
Preparing and Basic Operations
24