SF-710/510/310
User's Guide
Uploading Measurement Data
You can upload measurement data to the Web application (NeoRun).
A
Connect the cradle to the computer on which NR Uploader is installed with a USB
cable.
B
Place the device into the cradle.
Check that the contact points on the device are pointing up and match the contact marks on the cradle.
After placing the device into the bottom of the cradle, push carefully on the top of the device until it is fixed in
place.
c
Important:
Make sure the device is placed in the correct direction; otherwise, the cradle could be damaged.
NR Uploader starts.
Data Management Using the Web Application (NeoRun)
80