Epson SF-710 User Manual page 104

SF-710/510/310 User's Guide
Setting Lap/Target Pace/OFF
Here we will explain how to set Lap in Screen4.
A
Display the measurement screen.
Use one of the following methods to display.
❏ When performing GPS positioning:
Press C on the time screen.
❏ When skipping GPS positioning:
Press C on the time screen, and then select
Skip on the GPS positioning screen.
"Skipping GPS positioning" on
U
page 29
❏ When not performing GPS positioning
(Indoor mode: SF-710/SF-510 only):
Hold down C on the time screen.
"Indoor mode (SF-710/SF-510 only)"
U
on page 30
B
Display the Mes. Settings menu.
Hold down B on the measurement screen.
Settings
C
Select Screen.
Use C/D to select, and then press A.
D
Select Screen4.
Use C/D to select, and then press A.
E
Select Lap.
Use C/D to select, and then press A.
Screen Image is displayed.
After checking, press A and go to the following
step.
F
Complete the settings.
Hold down A.
The measurement screen is displayed.
Press A on the measurement screen to change the
screen, and then check if Screen4 has been
changed.
104