Resetting The System - Epson RUNSENSE SF-810 User Manual

Resetting the system

If your product is not functioning correctly, you can reset it.
Hold down all of the buttons (A/B/C or D) at the same time.
The screen resets and the product restarts. You will need to re-select the initial settings after the restart.
See "Initial Settings" on page 17.
c Important:
Measurement data is not recorded if a system reset is performed while measuring.
Note:
O Setting data and measurement data remain as they were before the reset was performed.
O The following shows the differences between a system reset and initialization. The time needs to be set again for both
operations.
System reset: The User Settings, Sys. Settings, Measure set., history, pulse, stride, and smartphone registration
information all remain as they were before the reset was performed.
Initialize: The User Settings, Sys. Settings, Measure set., history, pulse, stride, and smartphone registration
information are all Initialized.
Troubleshooting
89