Configure Network Scanning For Macintosh - Brother ADS-1100W User Manual

Before Scanning
the machine (ADS-1600W only) displays the name you enter. The default setting is your computer name.
You can enter any name that you like.
e
If you want to avoid receiving unwanted documents, enter a 4-digit PIN number in the Pin number and
Retype Pin number field.
(ADS-1600W only)
To send data to a computer protected by a PIN number, the LCD prompts you to enter the PIN number
before the document can be scanned and sent to the computer.

Configure Network Scanning for Macintosh

If you want to scan from the machine on a network, you must choose the networked machine in the
Device Selector application from the Model drop-down list in the main screen of ControlCenter2. If you have
already installed the MFL-Pro Suite software following the network installation steps in the Quick Setup
Guide, this selection should already be made.
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the Control Panel.
2
2
44