Brother ADS-1100W User Manual page 110

Scan from Your Computer
WIA Driver Settings
1 Paper source
You can select Document Feeder only.
2 Picture Type (Image Type)
You can select Color picture, Grayscale picture, Black and white picture or text or Custom Settings
for the type of document you want to scan.
If you want to change some advanced settings, click Adjust the quality of the scanned picture.
Resolution

You can select a scanning resolution from the Resolution text box. Higher resolutions take more memory
and transfer time, but produce a finer scanned image.
Brightness

Adjust the setting (-50 to 50) to get the best image. The default value of 0 represents an average and is
usually suitable for most images. You can set the Brightness level by dragging the slider to the right or
left to lighten or darken the image. You can also enter a value in the box to set the level. If the scanned
image is too light, set a lower Brightness level and scan the document again. If the image is too dark, set
a higher Brightness level and scan the document again.
 Contrast
Adjust the setting (-50 to 50) to get the best image. The default value of 0 represents an average and is
usually suitable for most images. You can increase or decrease the contrast level by moving the slider to
the right or left. An increase emphasizes dark and light areas of the image, while a decrease reveals more
details in grey areas. You can also enter a value in the box to set the Contrast.
1
2
3
3
98