Brother ADS-1100W User Manual page 101

Scan from Your Computer
You can configure more settings in the Advanced Settings dialog box. Click the Advanced Settings button.
Setting Description
Brightness Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can set the Brightness
level by dragging the slider to the right or left to lighten or
darken the image. If the scanned image is too light, set a
lower Brightness level and scan the document again. If the
image is too dark, set a higher Brightness level and scan
the document again.
Contrast Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can increase or decrease
the contrast level by moving the slider to the right or left.
An increase emphasizes dark and light areas of the
image, while a decrease reveals more details in grey
areas.
NOTE
The Contrast setting is only available when setting
Scan Type to Auto, Gray (Error Diffusion),
True Gray or 24bit Color.
Auto Deskew Corrects the skew (within 5 degrees) of the scanned
data.
Auto Image Changes the direction of the document based on the text
Rotation
orientation.
Bleed Through Prevents the Bleed Through phenomenon on a two-sided
Prevention/ document, and also allows you to remove the base colour
Remove of documents such as newspapers to make the scanned
Background
data more recognizable.
Color
Skip Blank Page Removes blank pages of the document from the scanning
results.
Display Scanning Shows the numbers of total pages saved and blank pages
Results skipped on your computer screen.
1
Depending upon the condition of the original document, this function may not work properly.
1
1
1
1
Applicable Feature
Image OCR E-mail
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
File
Yes
3
Yes
Yes
Yes
Yes
Yes
Yes
89