Brother ADS-1100W User Manual page 149

Scan from the Control Panel of the Machine
g
Press and then
NOTE
The file name will be the current date plus a two-digit sequential number.
(ADS-1600W)
a
Insert a USB flash memory drive into your machine.
b
Load your document.
c
Press d or c to display to USB.
d
Press to USB.
e
Press Options.
f
Configure the settings for 2-sided Scan, Scan Type, Resolution, File Type, Document Size,
File Name, Auto Deskew and Skip Blank Page as needed. Press OK.
NOTE
• To select Long Paper (up to 863mm) for Document Size, use these settings:
• Auto Deskew: Off
• 2-sided Scan: Off
• If you want to save the settings as a new default, press Set New Default.
• If you want to restore all settings to the factory settings, press Factory Reset.
g
Press Start.
The machine starts scanning, and then the scanned data is saved on the USB flash memory drive.
NOTE
If you want to save the settings as a shortcut, press Save as Shortcut. For more information, see Set
Up the Shortcuts (ADS-1600W only) on page 157.
IMPORTANT
DO NOT remove the USB flash memory drive while the machine is scanning to the USB flash memory
drive to avoid damaging the drive or the data stored on it.
. The machine starts scanning.
4
137