Download Print this page

Memory Card - Brother DSmobile 820W Quick Setup Manual

Advertisement

3
Scan a document to the

memory card

NOTE
To scan a document using your computer (TWAIN Mode),
you must install scanner drivers and software (see step 5)
and connect your computer to the scanner (see
Connecting your scanner to your computer in TWAIN Mode
in the User's Guide).
a
Make sure that the SD Memory Card is in the scanner's
memory card slot.
b
Press the Power button
to turn on your scanner.
c
Make sure that SD appears on
the scanner's LCD panel.
d
Insert your document, face up,
into the feeder slot.
Align the document with the left edge 2 of the feeder slot.
Slide the document guide 3 until it touches the right side
of the document.
e
Gently push the document until you feel its top edge touch
the inside of the scanner.
f
Scanning begins automatically. The scanned image will be
saved onto the SD Memory Card.
Browse scanned
4
images using a
wireless network
NOTE
If you have not set a Wi-Fi
to set up a network password in your web browser first.
For more information on setting a password, see Setting
®
a Wi-Fi
network password in the User's Guide.
®
Without a Wi-Fi
can be viewed and stolen by a third party.
Locate the scanner on your
wireless network
a
Slide the Wi-Fi
end of your scanner to ON.
Wait for about 40 seconds, until
®
the Wi-Fi
LED turns from red
to blue.
b
Activate the Wi-Fi
your wireless equipment (computer, smartphone, tablet,
etc.) so that it can search for your scanner.
c
On your wireless device, select your scanner's SSID,
Brother DS-820W-xxxx.
(Where xxxx = your scanner's Media Access Control
(MAC) address.)
2
1
®
network password, be sure
network password, data on your SD card
®
switch on the
®
function of
Browse for scanned images on your
scanner's memory card
a
Make sure that the SD Memory Card is in the scanner's
memory card slot.
b
Launch a web browser on your wireless device and type
http://10.10.100.1 (your scanner's IP address) in the
address bar.
When you first view scanned images, the Password Setup
screen will appear. Set a password and click Apply.
If you have already set your password, log in by entering
your password.
Your scanner's home
page appears in the
browser.
When there are scanned
images saved on the
memory card, these
images will appear in the
home screen.
NOTE
You can also view scanned images stored on the memory
card by inserting the memory card directly into your
computer's memory card slot (if applicable).
After viewing the scanned data, slide the Wi-Fi
OFF to save the battery.
View scanned images using
Android™ / iOS
To use ScanHub™ for browsing or downloading images from your
scanner, install the application from Google Play (Android™) or the
App Store (iOS) onto your wireless equipment (computer,
smartphone, tablet, etc.).
Storage service on Brother Online
Brother Online can provide you with a document management
service for your scanned images.
For more information, visit
http://www.brother.com/product/brotheronline/
5
Install scanner drivers
and scanning software
NOTE
Make sure that your computer is ON and you are logged on
with Administrator rights.
If your computer does not have a DVD-ROM drive,
download the scanner driver from Brother Solutions Center
at http://solutions.brother.com/
®
switch to

Advertisement

loading