Brother ADS-1100W User Manual page 212

Troubleshooting
Difficulty Cause
Cannot find how to —
start ControlCenter4
®
(Windows ).
Cannot start You have not logged in the computer as
ControlCenter2. the administrator.
Cannot find how to —
start ControlCenter2
(Macintosh).
(ADS-1100W only) —
Cannot find how to
configure the settings
to scan from the
Control Panel of the
machine.
(ADS-1100W only) —
Cannot find IP address
of the machine.
Cannot save the 
settings in Remote

Setup or Web Based
Management.
The machine is processing.
The machine is being configured
from the machine's Control Panel.
Suggestions
If the icon is not displayed in the task tray, do
one of the following:
®
 (Windows XP, Windows Vista
7 users)
Click (Start), All Programs, Brother,
ADS-XXXXX (where XXXXX is your model
name) and then ControlCenter4.
®
 (Windows 8 users)
Click (Brother Utilities), and then click
the drop-down list and select your model name
(if not already selected). Click SCAN in the left
navigation bar, and then click ControlCenter4.
Restart the computer and log in as the
administrator.
To start ControlCenter2, click the
(ControlCenter2) icon in the Dock. If the
(ControlCenter2) icon is not displayed in the
Dock, click Go from the Finder menu bar,
Applications, Brother, and then double-click the
(ControlCenter2) icon. The
(ControlCenter2) icon will appear in the Dock.
Use Remote Setup or Web Based Management.
See Set Up the Brother Machine from Your
Computer on page 165 or Start Web Based
Management on page 114.
Start Remote Setup and then select Network in the
folder tree. See Set Up the Brother Machine from
Your Computer on page 165.
 Wait until the machine finishes processing and
then try again.
 Stop configuring the machine from the Control
Panel.
® ®
and Windows
7
200