Brother ADS-1100W User Manual page 233

Appendix
Status
File Name
Cannot Be
Used (Scan to
USB)
Unusable
Device (Scan to
USB)
Unusable USB
Device (Scan to
USB)
USB Hub Not
Supported
(Scan to USB)
Authenticate
Error (Scan to
FTP)
Server Time
Out (Scan to
FTP)
Descriptions
The maximum sequential
number for the file name has
been reached. Press
delete unused files from the
USB flash memory drive and
then try again.
An unsupported USB device is
inserted in the USB Direct
Interface. Remove the
unsupported USB device,
such as a mouse, from the
USB Direct Interface.
An unusable device is inserted
in the USB port. Disconnect
the device, turn the machine
off and then on.
A hub or USB flash memory
drive with a hub is inserted in
the USB Direct Interface.
Remove the unsupported
device, such as a USB hub or
USB flash memory drive with a
hub, from the USB Direct
Interface.
A server authentication error
occurred because the FTP
user name and password you
entered are incorrect or not
configured correctly. Confirm
that the user name and
password are configured or
entered correctly and then try
again.
Check the following and then
try again.
The network settings are

correct.
 Your wireless access
point/router is turned on.
 The remote FTP server is
turned on.
 The name (or IP address)
of the FTP remote server is
correct.
,
B
221