Download Print this page

GE CC-SCSTAT Installation Manual page 23

General electric thermostat user manual
Hide thumbs

Advertisement

19
Heating delta stage 3 on: 1 to 8 degrees (default 5). Set the delta from setpoint that stage 3 heating
starts. Stage 3 turns off at setpoint.
Cooling delta stage 1 on: 1 to 8 degrees (default 1). Set the delta from setpoint that stage 1 cooling
starts. Stage 1 turns off at setpoint.
Cooling delta stage 2 on: 1 to 8 degrees (default 3). Set the delta from setpoint that stage 2 cooling
starts. Stage 2 turns off at setpoint.
WDU settings submenu.
Messaging enable: Y or N (default N). Enable (Y) or disable (N) the network messaging function. If
you intend to use the messaging capability of the thermostat, you must enable it here by setting it to Y.
Messages will then appear as a menu item in the main Menu screen and you will be able to receive and
browse through the messages.
CAUTION: Do not change the installer settings unless you are sure of the effect these changes will make. Changing the
network address will make the thermostat not respond if the address is incorrect.

Advertisement

loading

  Related Manuals for GE CC-SCSTAT

This manual is also suitable for:

Smartcommand cc-scstat