Table of Contents
Advertisement
12
SmartCommand Thermostat
Installation Manual
User settings screen
The User settings screen (Figure 8) allows you to set or change various user options of the thermostat such as
the clock, minimized screen timeout, Fahrenheit/Centigrade mode, sensor calibration, and backlight settings.
Figure 8. User settings screen
Screen options include:
Set clock. Access the
Screen timeout. Set the screen timeout time in seconds. Options are 0 or 15 to 127 (default is 30 seconds).
This is the time before any screen reverts to the Minimized screen after you stop pushing buttons. You can
disable the Minimized screen feature by setting this time to 0. If this is disabled, all screens revert to the
main
Thermostat control screen
F/C select. Select which temperature display mode you desire, Fahrenheit (F) or Centigrade (C) with the
+ and - buttons.
Sensor calibration. Access the
Backlight/Display. Access the
Screen navigation buttons include:
Done. Return to the
Plus. Increase the selected value.
Minus. Decrease the selected value.
Select. Select the function to be set.
Up. Move selection pointer up.
Down. Move selection pointer down.
User Settings
Set Clock
Screen Timeout
F/C Mode
Sensor Calibration
Done
Done
Set clock screen
on page 13.
on page 4 after 120 seconds.
Sensor calibration screen
Backlight display screen
Main menu screen
on page 7.
30
F
+
-
Select
Plus
Minus
Select
on page 14.
on page 15.
Up
Down
Advertisement
Table of Contents
