Appendix F; Spm Cable Connections - Honeywell TMS 9250 User Manual

6.6

APPENDIX F

SPM cable connections

Setting up the cables involves the following steps.
ATTENTION:
The interface cables must be shielded type and connected to product end
only.
Step
Keep the SPM on table with ESD plane, and wear the ESD strap.
Step 1a:
Opening
Open the cover of the SPM box by removing the screws.
SPM
Rev B
April 2012
© 2012 – Honeywell International Inc. All rights reserved
Step 1: Removing the Cover of the SPM Box
TMS 9250 Product User Manual
Action
6. Appendices
008-0738-00
51