Table of Contents
Advertisement
•
Check that the correct serial port is selected in the software or TMS Toolkit. When using
Windows, the serial port in use can be found by using the CONTROL PANEL, SYSTEM,
HARDWARE, DEVICE MANAGER, COM ports functions.
•
On older desktop computers, the COM1 port is already in use for the mouse, so a different
COM port should be selected.
•
If using a USB to Serial adapter, Windows assigns the COM port designations dynamically
so they may change whenever the system is rebooted.
•
The serial port settings are automatically modified by TMS Toolkit so there is no need to
change any of the settings in Windows.
•
The baud rate setting in TMS Toolkit should always be 38400 because that is the default
baud rate of the TMS 9250.
•
The "TMS ID" should be left blank because TMS Toolkit will search the connected port for
any TMS device and will commence the communication automatically if present.
•
Refer to the TMS Toolkit User Manual for more information.
Rev B
April 2012
© 2012 – Honeywell International Inc. All rights reserved
TMS 9250 Product User Manual
4. Troubleshooting
008-0738-00
35
Advertisement
Table of Contents
