Table of Contents
Advertisement
1. TMS 9250 Torque Measurement System
1.1
Important General and Safety Warnings
Before you work on any electronic equipment, review and follow the safety guidelines to help
protect the system from potential damage and to ensure personal safety.
WARNING
MISUSE OF DOCUMENTATION
AVERTISSEMENT
MAUVAIS USAGE DE LA DOCUMENTATION
WARNING
PERSONAL INJURY
AVERTISSEMENT
PERSONNELS BLESSURES CORPORELLES
CAUTION
Rev B
April 2012
© 2012 – Honeywell International Inc. All rights reserved
•
Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product.
•
Failure to comply with these instructions could result in death or
serious injury.
•
Les informations complètes d'installation, d'utilisation et d'entretien
sont fournies avec les instructions accompagnant chaque produit.
•
L'inobservation de ces instructions risque d'entraîner des blessures
graves, voire mortelles.
•
DO NOT USE these products as safety or emergency stop devices
or in any other application where failure of the product could result
in personal injury.
•
Failure to comply with these instructions could result in serious
injury or death.
•
NE PAS UTILISER ces produits en tant que dispositifs d'arrêt
d'urgence ou de sécurité, ni dans aucune autre application où la
défaillance du produit pourrait entraîner des personnels blessures
corporelles.
•
L'inobservation de ces instructions risque d'entraîner des blessures
graves, voire mortelles.
•
For continued protection from electrical shock, all connectors on the
SPM and CCM shall be connected to equipment providing low
voltage (not more than 33Vac rms / 46.7V peak or 70Vdc total)
double insulated (SELV) sources of supply.
•
When you are adjusting the CCM to align with the torque sensor,
you must lock out power to the prime mover and ensure that you
are trained prior to accessing these areas of the installation.
TMS 9250 Product User Manual
1. TMS 9250 Torque Measurement System
008-0738-00
9
Advertisement
Table of Contents
