Honeywell TMS 9250 User Manual page 5

Torque measurement system
Table of Contents

Advertisement

Symbol Definitions
The following table lists those symbols used in this document to denote certain conditions.
Symbol
CAUTION
v
April 2012
© 2012 – Honeywell International Inc. All rights reserved
ATTENTION: Identifies information that requires special consideration.
TIP: Identifies advice or hints for the user, often in terms of performing a task.
REFERENCE - EXTERNAL: Identifies an additional source of information
outside of the booklet.
REFERENCE - INTERNAL: Identifies an additional source of information within
the booklet.
Indicates a situation which, if not avoided, may result in equipment or work
(data) on the system being damaged or lost, or may result in the inability to
properly operate the process.
CAUTION: Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury. It may also be used to alert against
unsafe practices.
CAUTION symbol on the equipment refers the user to the product manual for
additional information. The symbol appears next to required information in the
manual.
WARNING: Indicates a potentially hazardous situation, which, if not avoided,
could result in serious injury or death.
AVERTISSEMENT : Indique une situation potentiellement dangereuse.
L'inobservation de ce symbole risque d'entraîner des blessures graves, voire
mortelles."
WARNING symbol on the equipment refers the user to the product manual for
additional information. The symbol appears next to required information in the
manual.
Ce symbole d'AVERTISSEMENT apparaît sur l'équipement et renvoie
l'utilisateur aux informations qui se trouvent dans le manuel du produit. Dans le
manuel, ce symbole apparaît à côté de l'information correspondante.
WARNING, Risk of electrical shock: Indicates potential shock hazard where
HAZARDOUS LIVE voltages greater than 30 Vrms, 42.4 Vpeak, or 60 VDC may
be accessible.
AVERTISSEMENT, risque d'électrocution : Indique un risque d'électrocution car
des tensions supérieures à 30 Vrms, 42,4 Vpic ou 60 Vcc, POUVANT ETRE
MORTELLES, sont accessibles.
TMS 9250 Product User Manual
Definition
Rev B

Advertisement

Table of Contents
loading

Table of Contents