Product Specifications - Honeywell TMS 9250 User Manual

Product Feature
Power Supply
Adapter
Signal Processing
Module
Protection
Warm-Up Time
Pollution Degree
Analog Output
Signals
Output Drives
Capability
Digital Resolution
RF carrier
frequency
Accuracy
Temperature
Range
Frequency
Response
Digital Filtering
Rev B
April 2012
© 2012 – Honeywell International Inc. All rights reserved

5. Product Specifications

Input 90~264 VAC 47~63 Hz 20 W
Output 12 VDC 1.66 A
12 V, 1 A
Short Circuit and over voltage protection
30-45 minutes
3
4-20 mA (zero torque = 12 mA)
± 10 VDC (zero torque = 0 V)
10 kHz ± 5 kHz (zero torque = 10 kHz)
60 kHz ± 20 kHz (zero torque = 60 kHz)
Current: 4-20 mA: 400 Ω max including cable resistance
Voltage: +/- 10 VDC: 2 k Ω min
Frequency 10 kHz ± 5 kHz and 60 kHz ± 20 kHz:
4 V p-p for 100 k Ω and 2.3 V p-p for min load of 1 kΩ
Normal mode 16-bit ( 0.01 %FS)
13.56 MHz
System 0.050% FS typical
Note: 4-20 mA Current output drifts with input power supply change around the
nominal 12 V
Operating, Sensor and CCM Only
Operating, SPM and Power Supply
Compensated
Storage temperature:
Input sampling rate
Anti-aliasing filter fixed
Telemetry update rate
Fast mode data throughput rate
Normal mode data throughput rate
Group delay (typical, normal mode)
Group delay (typical, fast mode)
IIR mode: Recursive algorithm with selectable filter levels and filter steps
TMS 9250 Product User Manual
Product Specification
-40 ˚ to 85 ˚C (-40 ˚ to 185 ˚F)
0 ˚ to 40 ˚C (32 ˚ to 104 ˚F)
-10 ˚ to +50 ˚C (14 ˚ to 122 ˚F)
The product can be stored for an indefinite
period in a dry place at room temperature
17,656 samples/sec
4.1 kHz
8.828 kHz
8.828 kHz
1.104 kHz
2.5 ms
1.2 ms
5. Product Specifications
008-0738-00
37