Table of Contents
Advertisement
TOUR Notes
Master Dimmer
Red, Green, Blue, and
White Color Selection
Color Macros
Strobe
Auto/Custom
Programs
Dimmer Speed
COLORado™ Batten Quad-9 Tour User Manual Rev. 1
These notes clarify the way the TOUR DMX personality works.
·
Channel 1 controls the intensity of the currently projected color.
·
When the slider is at the highest position (100%), the intensity of the output is at
maximum.
·
Channels 2 through 5 control the intensity ratio of each of the red, green, blue, and
white LEDs.
·
When these channels are at the highest position (100%), the intensity of each color
is at maximum if SET > COLR is OFF.
·
You can combine channels 2 through 5 to create over one trillion colors.
·
Channel 6 selects the desired color macro.
·
Channel 6 has priority over channels 2 through 5.
·
Channel 1 controls the intensity of the color macro.
·
Channel 7 controls the strobe frequency (not the intensity) of channels 2 through 6.
·
Channel 7 can strobe channels 2 through 5 when not running macros, allowing the
individual faders (R, G, B, and W), as well as channel 1 (dimmer), to control the
output intensity.
·
Channel 7 can strobe when running macros, with channel 6 selecting the macro and
channel 1 controlling the output intensity.
·
Channel 8 selects the preset auto programs AT.01–10 or the custom programs
PR.01–10.
·
When activating the custom programs PR.01–10, you can control the Step Time and
Fade Time using channels 2 and 3, respectively.
·
Channel 8 has priority over channels 2 through 7.
·
Channel 9 controls the speed at which each auto program plays.
·
Channel 10 selects the Dimmer mode and speed. The Dimmer mode provides four
different options to simulate the dimming curve of an incandescent lighting product.
·
When the dimmer is set to OFF, the changes in the RGBW and Master Dimmer
faders are linear.
·
When the dimmer is set to DIM1–DIM4, DIM1 is the fastest dimmer curve and DIM4
is the slowest.
Operation
-15-
Advertisement
Table of Contents
