Safety Notes; Personal Safety; Mounting And Rigging; Power And Wiring - Chauvet COLORado Batten Quad-9 Tour User Manual

Before You Begin

Safety Notes

Personal Safety

Mounting and
Rigging

Power and Wiring

Operation

Expected LED
Lifespan
-2-
Read all the following Safety Notes before working with this product. These notes
include important information about the installation, usage, and maintenance of this
product.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained CHAUVET® certified
technicians. Do not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
·
Avoid direct eye exposure to the light source while the product is on.
·
Always disconnect this product from power before servicing.
·
Always connect this product to a grounded circuit to avoid the risk of electrocution.
·
Do not touch this product's housing when operating because it may be hot.
·
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose this product to rain or moisture.
·
Make sure there are no flammable materials close to this product while it is
operating.
·
When hanging this product, always secure to a fastening device using a safety
cable (included).
·
Always make sure you are connecting this product to the proper voltage in
accordance with the specifications in this manual or on the product's specification
label.
·
Never connect this product to a dimmer pack or rheostat.
·
Never disconnect this product by pulling or tugging on the power cable.
·
Do not operate this product if you see damage on the housing, lenses, or cables.
Have the damaged parts replaced by an authorized technician at once.
·
Do not cover the ventilation slots when operating to avoid internal overheating.
·
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product
at a higher temperature.
·
In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single-LED
conditions. For this reason, using clustered LEDs at their fullest intensity significantly
reduces the LEDs' lifespan. Under normal conditions, this lifespan can be 40,000 to
50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product and reducing the ambient temperature to
an optimal operating range. In addition, limiting the overall projection intensity may also
help to extend the LEDs' lifespan.
COLORado™ Batten Quad-9 Tour User Manual Rev. 1