TOUR Notes
Master Dimmer
Red, Green, Blue, and
White Color Selection
Color Macros
Strobe
Auto/Custom
COLORado™ Deco Quad 1 Tour User Manual Rev. 1
These notes clarify the way the tor DMX personality works.
• Channel 1 controls the intensity of the currently projected color.
• When the slider is at the highest position (100%), the intensity of the output is at
maximum.
• Channels 2 through 5 control the intensity ratio of each of the Red, Green, Blue, and
White LEDs.
• When these channels are at the highest position (100%), the intensity of each color is
at maximum if SEt > CoL is OFF.
• You can combine channels 2 through 5 to create over one trillion colors.
• Channel 6 selects the required Color Macro.
• Channel 6 has priority over channels 2 through 6.
• Channel 1 controls the intensity of the Color Macro.
• Channel 7 controls the strobe frequency (not the intensity) of channels 2 through 6.
• Channel 7 can strobe channels 2 through 5 when not running macros, allowing the
individual faders (R, G, B, and W), as well as channel 1 (D), to control the output
intensity.
• Channel 7 can strobe channel 6 when running macros, allowing channel 6 to select
the macro and channel 1 to control the output intensity.
• Channel 8 selects the preset auto programs A.01~10 Channel 8 has priority over
channels 2 through 7.
• Channel 9 controls the speed at which each auto program plays.
Operation
-11-