Power Linking; Dmx Linking; Dmx Modes; Master/Slave Connectivity - Chauvet COLORado Batten Quad-9 Tour User Manual

Power Linking

DMX Linking

DMX Modes

Master/Slave
Connectivity
COLORado™ Batten Quad-9 Tour User Manual Rev. 1
The COLORado™ Batten Quad-9 supports power linking. You can power link up to
9 products at 120 V, 14 products at 208 V, or 15 products at 230 V.
This product comes with a power input cord. This product does not come with a power
linking cable; however, a power linking cable is available as an option.
You can link the COLORado™ Batten Quad-9 Tour to a DMX controller using a standard
DMX serial connection. If using other DMX compatible products with the COLORado™
Batten Quad-9 Tour, you can control each individually with a single DMX controller.
The COLORado™ Batten Quad-9 Tour uses the standard DMX data connection for its
TOUR, TR16, ARC.1, AR1.D, ARC.2, AR2.D, AR2.S, HSV, PIX1, PIX2, and HALO
DMX modes.
·
Refer to the Introduction
·
Refer to the Operation
Quad-9 Tour to work in these modes.
·
The DMX Values
DMX modes.
The Master/Slave mode allows a COLORado™ Batten Quad-9 Tour (the "master") to
control one or more products (the "slaves") without a DMX controller.
One COLORado™ Batten Quad-9 Tour becomes the master product either when
running in static (STAT) mode or when using the automatic (AT) or customizable (PR)
programs.
In addition, you must configure each of the slaves (via their control panels) to operate in
Slave (SLAV) mode. During Master/Slave operation, the slaves will operate in unison
with the master.
For more information, see the
Do not connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master product.
·
The Operation section of this manual provides detailed instructions on how to
configure the Master and Slave products.
·
If you need more information about DMX standards, Master/Slave connectivity, or
the DMX cables needed in order to link the product to a DMX controller, download
the DMX Primer from the CHAUVET® website: www.chauvetpro.com.
·
Verify the DIMX and CURV settings are set to OFF for optimal control of the TR16
personality. For more information, see
section for a brief description of these modes.
section to learn how to configure the COLORado™ Batten
section provides you with detailed information regarding the
Menu Map section.
Menu Map.
Setup
-7-