Tour Notes; Master Dimmer; Red, Green, Blue, And White Color Selection; Color Macros - Chauvet COLORado 1 IP User Manual

Operation

TOUR Notes

Master Dimmer

Red, Green, Blue,
and White Color
Selection

Color Macros

Strobe

Auto/Custom

Dimmer Speed

ID Address
Selection
-14-
These notes clarify the way the TOUR DMX personality works.
• Channel 1 controls the intensity of the currently projected color.
• When the slider is at the highest position (100%), the intensity of the output is at
maximum.
• Channels 2 through 5 control the intensity ratio of each of the Red, Green, Blue, and
White LEDs.
• When these channels are at the highest position (100%), the intensity of each color is at
maximum if SET > COLO is OFF.
• You can combine channels 2 through 5 to create over one trillion colors.
• Channel 6 selects the required Color Macro.
• Channel 6 has priority over channels 2 through 5.
• Channel 1 controls the intensity of the Color Macro.
• Channel 7 controls the strobe frequency (not the intensity) of channels 2 through 6.
• Channel 7 can strobe channels 2 through 5 when not running macros, allowing the
individual faders (R, G, b, and w), as well as channel 1 (d), to control the output
intensity.
• Channel 7 can strobe channel 6 when running macros, allowing channel 6 to select the
macro and channel 1 to control the output intensity.
• Channel 8 selects the preset auto programs AT.01~10 or the custom programs
PR.01~10.
• When activating the custom Auto programs PR.01~10, you can control the Step Time
and Fade Time using channels 2 and 3, respectively.
• Channel 8 has priority over channels 2 through 7.
• Channel 9 controls the speed at which each auto program plays.
• Channel 10 selects the dimmer mode and speed. Dimmer mode provides four different
options to simulate the dimming curve of an incandescent lighting product.
• When dIM is set to OFF, the changes in the RGbw and Master Dimmer faders are linear.
• When dIM is set to dIM1~dIM4, dIM1 is the fastest dimmer curve and dIM4 is the
slowest.
• Channel 11 selects the target ID address.
• Each independent DMX address may have up to 66 independent ID addresses.
• An ID address of 0 will activate all ID address locations.
COLORado™ 1 IP User Manual Rev. 2