Mounting; Orientation; Rigging - Chauvet COLORado Batten Quad-9 Tour User Manual

Setup

Mounting

Orientation

Rigging

Procedure The COLORado™ Batten Quad-9 Tour comes with two adjustable feet that double as
Mounting Diagram
-8-
Before mounting this product, read and follow the
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
The COLORado™ Batten Quad-9 Tour comes with two adjustable feet that double as
hanging brackets to which you can attach mounting clamps. CHAUVET® recommends
using the following general guidelines when mounting this product.
·
When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
·
Make sure to mount this product away from any flammable material as indicated in
the Safety Notes.
·
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
·
If hanging this product, make sure that the mounting location can support the
product's weight. Refer to the
requirements of this product.
·
When hanging this product, always secure to a fastening device using a safety cable
(included).
hanging bracket to which you can attach clamps. These brackets also serve as floor
stands or wall-mount supports. You must supply your own clamps and make sure the
clamps are capable of supporting the weight of this product. You must use two mounting
points per product.
Safety Cable
(such as CH-05
from CHAUVET®
Overhead Mounting
Safety Notes
Technical Specifications
Floor Mounting
COLORado™ Batten Quad-9 Tour User Manual Rev. 1
in this manual.
for the weight-bearing
Mounting Clamps
(such as CLP-15 or
CLP-15N from
CHAUVET®