Table of Contents
Advertisement
S
e
l
e
c
t
i
o
n
o
f
t
h
e
S
e
l
e
c
t
i
o
n
o
f
t
h
e
It is now possible to select the Tear-Off Mode.
1. Press the
PROGRAM
Program Setup.
2. Press the ↓ key. The following message is displayed:
3. Press the → key to select the macro for which you want to set the tear-off mode MACRO#1,
MACRO#2, MACRO#3 or MACRO#4).
4. Press the ↓ key, until the following message is displayed:
Pressing the
→
or
←
key it is now possible to decide how to execute the tear off function:
TEAR NORMAL
TEAR AUTOMATIC
LABEL
TEAR NO
5. Press the
PROGRAM
T
e
a
r
-
O
f
f
M
o
d
e
T
e
a
r
-
O
f
f
M
o
d
e
key when the printer is disabled or enabled without printing to enter the
USER MACRO
TEAR NORMAL
Pressing the
key the paper is moved to the tear-off position.
TEAR
Pressing again the
TEAR
moved to the printing position.
If the printer is not receiving data, the paper is moved automatically to the
tear position.
The
key is disabled for the tear-off function. This selection is useful
TEAR
when printing on labels. Pressing the
toward the back of the printer.
The tear-off function is disabled.
key to exit the setup.
key to exit from the tear-off mode, the paper is
key, the printer ejects the paper
PARK
106
Advertisement
Table of Contents
Need help?
Do you have a question about the 10200 and is the answer not in the manual?