Compuprint 10200 User Manual page 39

ON LINE Key
Normal
ON LINE
Function
Program
Function
PROGRAM Key
Normal
PROGRAM
Function
Program
Function
MACRO Key
Normal
MACRO
Function
Program
→
Function
Enables or disables the printer.
• If this key is pressed while powering the printer on, the self test is printed;
the printout is stopped pressing this key again.
• In an error condition, once the error cause has been removed, press this
key to enable the printer
Pressing this key, the input buffer is cleared an a break (250 msec.) on a serial
interface is sent. The message RESET & BREAK is displayed.
Enables the printer setups as follows:
• Pressing this key while powering on the printer, the Power-On
Configuration is selected.
• Pressing this key when the printer is enabled without printing or disabled
the Program Setup is enabled (
Exits the printer setups.
Selects one of the user macros (Macro 1, Macro 2, Macro 3 or Macro 4). If you
want to select the displayed macro, wait for 2 seconds without pressing any
key and the parameters of this macro will be set .
Scrolls the parameters of the functions or macros forwards.
35
indicator lit).
PROGRAM