Compuprint 10200 User Manual page 81

Adjusting the Tear-Off Position
F2 JAM SENS. Y
or
F1 JAM SENS. Y
↑
TEAR ADJUST: - 30
TEAR ADJUST: ...
TEAR ADJUST: +360
↓
BUZZER YES
These values adjust the distance between the Tear-Off Perforation and the
TEAR ADJUST:
Tear-Off Bar. The values correspond to 1/180 inch units, i.e. the tuning ranges
xxxx
between -1/6 and 2 inch. 0 is the default value.
See also "How to Use the Tear-Off Function", later in this Chapter.
→ or ←
→ or ←
→ or ←
77