Compuprint 10200 User Manual page 35

Message
OPER. INTERRUPTED
PARKING
PATH CHANGING
PRESS A KEY
NVM CHANGED
RELEASE KEY
REMOTE CONTROL
RESET & BREAK
SELF TEST
TEAR IF NECESS.
EJECT PAPER
TEAR IF NECESS.
PARK PAPER
Description
This message is displayed if the
park procedure.
The printer is parking the fanfold paper.
The path has been changed and the printer is updating the settings.
The NVM has been changed. Press any key to set the printer.
This message is displayed when you can release the PROGRAM key in the Self-
test selection or in the Power-on Configuration procedure.
This message is displayed when the printer operates from remote control (only
if the LAN interface board is installed).
The printer received a reset and break command via interface.
Printing the self-test page.
These messages are displayed when the printer receives a paper parking
command and the TEAR NO item is selected for the tear-off function. Tear off
the fanfold then press the PARK key to eject the paper.
These messages are displayed when the printer receives a paper parking
command. Tear off the fanfold paper if necessary and then press the PARK key
to park the paper.
key has been pressed to interrupt a
ALTERNATE
31