Compuprint 10200 User Manual page 21

9. Turn again the ribbon-winding knob in the arrow direction (located on the cartridge) to take
up slack in the ribbon.
10. Push the cartridge down gently until it clips into place at both locking points.
11. Turn the ribbon-winding knob again in the direction of the arrow to take up slack in the ribbon.
12. To ensure that the ribbon guide runs freely along the ribbon, manually move the print carriage
horizontally.
If you need to replace the used ribbon cartridge, see
manual.
"Replacing The Ribbon
17
Cartridge", later in this