Compuprint 10200 User Manual page 125

12. If installed, reposition the Front2 tractor in
its initial position.
13. If your printer is installed on a table,
position the paper staple so that the paper
is freely fed into the printer.
If your printer is installed on the printer
cabinet, open the printer cabinet door and
lay the paper staple onto the shelf inside
the printer cabinet:
• Onto the lower shelf if you are using only
one paper staple. The paper must be fed
in front of the antistatic cable;
• Onto the upper shelf if you are going to
install a second paper staple. The paper
must be fed behind the antistatic cable.
14. Close the printer cabinet door and the
tractor area cover.
A ntis tatic c a b le
121