Table of Contents
Advertisement
S
e
l
e
c
t
i
o
n
o
f
t
h
S
e
l
e
c
t
i
o
n
o
f
t
h
It is now possible to select the Tear-Off Mode.
1. Press the
PROGRAM
Program Setup.
2. Press the ↓ key. The following message is displayed:
3. Press the → key to select the macro for which you want to set the tear-off mode (MACRO#1,
MACRO#2, MACRO#3 or MACRO#4).
4. Press the ↓ key, until the following message is displayed:
Pressing the
or
→
←
TEAR NORMAL
TEAR AUTOMATIC
LABEL
TEAR NO
5. Press the
PROGRAM
e
T
e
a
r
-
O
f
f
M
o
e
T
e
a
r
-
O
f
f
M
o
key when the printer is disabled or enabled without printing to enter the
key it is now possible to decide how to execute the tear off function:
Pressing the
TEAR
Pressing again the
moved to the printing position.
If the printer is not receiving data, the paper is moved automatically to the
tear position.
The
key is disabled for the tear-off function. This selection is useful
TEAR
when printing on labels. Pressing the
toward the back of the printer.
The tear-off function is disabled.
key to exit the setup.
d
e
d
e
USER MACRO
TEAR NORMAL
key the paper is moved to the tear-off position.
key to exit from the tear-off mode, the paper is
TEAR
111
key, the printer ejects the paper
PARK
Advertisement
Table of Contents
Need help?
Do you have a question about the 9065plus and is the answer not in the manual?