Point Text - Bosch Security Systems User Manual

ENTER CODE TO
START TEST
Prompt to enter a passcode to start the system test.
ENTER NEW AGAIN
Prompt to enter your new passcode again.
ENTER NEW CODE
Prompt to enter your new passcode.
ENTER OLD CODE
Prompt to enter your current passcode.
ENTER OWNER CODE
TO MODIFY CODES
Prompt to enter an Owner type passcode to change passcodes.
ENTER OWNER CODE
TO CHANGE POINTS
Prompt to enter an Owner type passcode in order to change watch points.
FIRE TRBL PT ##

[point text]

Indicates the fire point shown is in trouble condition.
## SEC TO EXIT!
Message displayed during exit delay to show how much time remains
before the system turns on.
## SEC TO EXIT!
[#] PTS BYPASSED
Indicates the system will turn on with points bypassed.
FOR NO DELAY
PRESS 9
Prompt to press [9] to turn system All On with No Delay.
FOR NO DELAY
PRESS 0
Prompt to press [0] to turn system Part On with No Delay.
HOLD TO VIEW
FAULTED POINTS
Indicates a point is faulted. Hold the [ ] key to see which point it is.
38