Exit Only - Bosch Security Systems User Manual

Exit Only

I have this feature.
I do not have this feature.
The Exit Only feature allows you to exit the premises when the system is All
or Part On with No Delay. After exit delay expires, the door is returned to
the system so that opening the door causes an alarm.
You may, for example, use the Exit Only feature when you are going out
but your family is staying home, saving you the trouble of having to turn
the system off and then on again.
1. The system must be All or Part On with No Delay.
2. Press the [CLEAR] key. The exit delay tone starts, and the display
shows the following:
3. Leave through the designated entry/exit delay door. After exit delay
expires, the door is returned to the system.
26
ALL ON NO DELAY
SYSTEM OK
30 SEC TO EXIT!
TO STOP
PRESS CLEAR