Honeywell UDC 2300 User Manual page 66

Operation
Step Operation
Return to Normal
4
Operation
58
Press
until you change the input selection in the upper display back to
[ ] [ ]
the proper selection. You will see:
Upper Display = Original Input Selection that matches your
type of sensor.
Lower Display = INxTYP
to return to Normal operating mode.
DISPLAY
The factory calibration will be restored. If the problem is not
corrected, contact the Honeywell Technical Assistance Center.
1-800-423-9883 USA and Canada
UDC2300 Universal Digital Controller User Manual
Result
4/00