Table of Contents
Advertisement
Insert the tabs into their slots and press the front panel up against the chassis until the front
2.
panel locks in place.
Replace the cover.
3.
Expansion Board
The following sections describe how to:
remove and replace the expansion board retainer bar, which secures expansion boards and
!
slot covers
remove and replace expansion boards
!
remove and replace slot covers.
!
Locations of the expansion board connectors on the system board are shown in the following
figure.
A – PCI Expansion Board Connectors
B – AGP Board Connector
Replacing the Front Panel
A – Chassis Slots (3)
B – Front Panel Tabs (3)
Locating Expansion Board Connectors
C – Front Panel
D – Chassis Front
C – CNR Board Connector
Disassembly and Reassembly 3-7
Advertisement
Table of Contents
