Checking System Memory; Installing A So-Dimm Module - NEC 2000 Series User Manual

Checking System Memory

If you do not know how much memory is installed in your system, check
the amount by using the following procedure.
On the Windows 98, Windows 2000, or Windows NT 4.0 desktop,
1.
point to
With the left mouse button, click
2.
the random access memory (RAM). This is the amount of system
memory in the computer.
In Windows 98 or Windows 2000, you can also find the amount of
memory by pointing to My
and selecting the

Installing a SO-DIMM Module

Use the following steps to install a SO-DIMM memory module.
the memory modules, wake a system in sleep mode, exit Windows, power
down the system, and unplug the AC power adapter power cord from the
power source.
If your system is in sleep mode, move the mouse or press a key to
1.
take it out of sleep mode.
Save and exit all your open applications and shut down Windows.
2.
Shut down the system by pressing and holding in the power button
3.
for four seconds or more.
Unplug the AC adapter power cord from the power source.
4.
4-8 Adding Expansion Devices
and click the right mouse button.
My Computer
Computer
Performance
To prevent damage to system components and
Properties
, clicking the right mouse button,
tab.
. The tab shows
General